![分布式电能质量智能优化装置 分布式电能质量智能优化装置]()
1, product introduction
Distributed power quality intelligent optimization device (referred to as UPDS) is suitable for solving the distribution network exists low voltage, three-phase unbalance, low power factor and harmonic problems. The use of advanced synchronous rectification technology, with anti-voltage disturbance ability, accurate compensation, high-speed dynamic response and so on. To the distribution network voltage (120V ~ 260V) fluctuations in the user to provide standard 220V ± 3% voltage.
2, Features
Bidirectional regulation of voltage: When the input voltage of the device is between 120V ~ 260V, the output voltage is stable to 220V ± 3%, the distortion rate is less than 3%. At the same time the device supports single-phase or three-phase connection.
Three-phase unbalanced management: Both active and reactive power required by the user side are provided by the DC support capacitor. Based on the synchronous rectification technology, the capacitor obtains active power from the grid without injecting reactive power and unbalanced current into the grid. When the user load is asymmetric, the transformer side is still balanced three-phase output.
Seamless Bypass Switching: The Distributed Power Quality Optimizer incorporates a bypass switch that intelligently determines when power is applied to the grid, switching bypass mode or online mode. Mode switching, the output voltage amplitude, phase and input voltage exactly the same, to achieve no current switching.
Modular design: Taking into account the growth of the user load characteristics, the device uses a modular design. Customers can configure the capacity according to different needs, the need for expansion or replacement, the increase or decrease can be easily replaced, thereby reducing duplication of investment.
Structural Design: The device supports outdoor pillar installation or indoor installation, the protection grade is IP54, which can be installed on the existing poles or distribution room.
Communication system design: Equipment with RS232 / 485 and GPRS interface, can access the power grid SCADA system, real-time monitoring of power grid voltage, current, power and other state, to achieve the daily maintenance of equipment and management.
Expansion: The device has reserved a new energy interface that can accept new energy such as photovoltaic, wind power or biogas power access. The new energy power access can effectively solve the capacity shortage of distribution transformers, ease the peak of power consumption and improve the stability of power distribution.
3、技术参数
主要技术参数 |
名称 | 参数 | 说明 |
输入 | 工作相电压 | 120V~260V | 可适应三相不平衡电压工况 |
电气接线 | 三相四线 | TN-S母线(独立的N线和PE线) |
工作电压频率 | 50Hz |
|
输出 | 额定输出电压 | 380V(-3%~+3%)三相3P4L; 220V(-3%~+3%)单相1P |
电气接线 | 三相四线 | TN-S母线(独立的N线和PE线) |
工作电压频率 | 50Hz/60Hz |
|
运行参数 | 额定容量 | 三相:0~75KVA | 可多机并联扩容 |
单相:0~25KVA | 可多机并联扩容 |
性能指标 | 开关频率 | ≥20KHz |
|
全响应时间 | <10ms |
|
网侧电流谐波含量 | <5% |
|
网侧功率因数 | ≥0.96 |
|
网侧有功不平衡度 | <3% |
|
环境条件 | 环境温度 | -30~55℃ |
|
相对湿度 | <95%RH 无凝露 |
|
海拔高度 | 2000m | 高于2000m后,每提升100m需降额1%运行 |
冷却方式 | 强制风冷 |
|
安装方式 | 户外型柱上安装或壁挂式安装;户内型壁挂式安装。 |
|
通讯接口 | 标准RS232/485接口、GPRS接口、以太网接口及电力线载波 |
扩展能力 | 最多12台设备并联 | 积木式结构 |
防护等级 | IP43,可根据用户要求定制 |
|
噪音 | ≤60dB |
|
可有效工作时间 | MTBF≥10万小时 |
|
4、产品列表
安装方式 | 线制 | 可选容量范围 | 标准型号产品 |
户外式 | 3P4L或3P3L | 0~75KVA | SYICD-UPDS 0.4/10-Z |
SYICD-UPDS 0.4/50-Z |
SYICD-UPDS 0.4/75-Z |
户内式 | 3P4L或3P3L | 0~75KVA | SYICD-UPDS 0.4/10-I |
SYICD-UPDS 0.4/50-I |
SYICD-UPDS 0.4/75-I |
5、产品命名说明
![分布式电能质量智能优化装置 分布式电能质量智能优化装置]()